Dream Tech Consulting
  Menu
  Search
 

Google

 


 
Mailing List
 
Enter your e-mail address to subscribe to our mailing list.
 
 
   
 

  ::Diagnostic:: :Equipment:

 

 
D1. RAYTEK ST60 INFRARED TEMPERATURE GUN
 
PRICE $758.00

   
 

The ST60 is a brand new Raytek which can perform all the task of the very popular ST6 unit plus a whole lot more! It has laser sighting which lets you know where the beam is at the point of target. It also has a built in adapter that will take a contact pyrometer probe thus allowing you to perform either contact or infrared temperature measurements as needed. It can also store 12 readings in a special data log section to recall at your convenience! This is truly a great Temperature Gun!

   
   
D2. RAYTEK ST60 INFRARED TEMPERATURE GUN
  PRICE $149.00 / 10 Tempilstik's + S&H
   
 

This is an easy and accurate way to determine the temperature of any surface on your corrugator.  Simply mark the area you are interested in and when the surface reaches the desired temperature the mark will melt. It is that easy. If the surface is already hot, mark the surface; if the temperature is hot enough the mark will immediately melt. If it is still too cool the mark will remain solid. The Tempilstik is available in a wide range of temperatures and comes in either Celsius or Fahrenheit. You pick the mixture of temperatures you want. Temperatures range from 100° to 500° F and comes in roughly 10° intervals.

       
   

 

  D3. HARDNESS METERS

 

  Prices of meters are: L$1,395.00 and LR $1,825.00  
   
 

Inexpensive, easy to operate Original Schmidt Hammers, Enable mill, converter, or printing company technicians to quickly check for common roll defects such as baggy centers or edges or poor winding profiles. The Type L hammer provides rebound values on the integrated scale. The Type LR hammer offers the additional feature of automatic recording, producing a bar graph roll profile. Values are recorded on a strip chart for each measurement taken. Has a convenient carrying case provides safe, easy transport of these portable, lightweight units and accessories.

 

 
 
D4. THE STAR FLUTE WEAR GAUGE
 
PRICE $50.00 + S&H
   
 

This is an excellent tool to help you access the wear on your corrugating rolls. You simply insert one of the four star points between the flutes of a corrugating roll, and the point that fits the snuggest can be used to tell you the % of wear you have on this roll. This tool may be just what you need to help determine the best time to have your rolls re-chromed. As you well know if you re-chrome them too soon you are wasting money, yet if you wait too long, you may end up having to completely rebuild the rolls (which can cost a fortune). In fact, you could buy hundreds of these Star Gauges with the money you could lose by waiting too long!

 

 
 
D6. Ti20 THERMAL IMAGER
 
PRICE = $6,995.00 + S&H
   
 

The Ti20 Thermal Imager is easy to use, thanks to one-handed "point-and-shoot" operation and intuitive on-screen guidance. For equipment it will easily show any hot spots that develop before a motor or bearing breaks down. The Ti20 Thermal Imager does not require specialist training to obtain accurate measurements. Just point at the target, focus the instrument, and it automatically adjusts the temperature range to show a image. When the trigger is pulled, the image and associated measurement data is stored.

This Imager needs just to be pointed at a motor or bearing and it will show up any hot spots that potentially will break down and cause unneeded lost time and waste, saving you thousands of Dollars! It is unique and revolutionary and has the potential of saving you fortunes!

       
       
D7. TEMPILABEL TEMPERATURE MONITORS
 

PRICE $74.00 + S&H

   
 
You can use these temperature labels to determine the critical inside maximum temperature of your DB liner by adhering them to the inside liner. Mark the location on the top liner when the label enters the DB edge. Then it will be easy to retrieve the marked sample on the dry end, open it up, and read your maximum temperature. They come in packs of ten strips with 4 temperatures on each strip . 1 strip will cover 4 different temperature such as 210, 220, 230 & 240 F. If you want a broader temperature range you can buy other sets with different a different temperature spread.

Now see new picture which is attached
 
       
D8. MITUTOYO DIGITAL FLUTE DEPTH GAUGE
 
PRICE $849.00 + S&H

 

 

   
  This digital flute depth gauge is the best by far. All it needs for calibrating is a flat surface, and it can read any flute depth without readjusting. It reads to the nearest .0001” and is by far the easiest model to use and to read.  Can be set to read in either inches or mm. Is equipped with battery and low battery warning signal. You no longer have to try to interpret crude or even multiple dial readings, simply read direct from large easy to read digital gauge.
       
       
D9. AQUA MEASURE MODEL AM-III MOISTURE METER
 
PRICE $2,085.00 + S&H
 

 

 

 

   
  This direct contact moisture meter also has digital readout; its recessed digital LED display is calibrated directly in percent moisture. Internal electrical standard allows instant calibration for varying density. Uses heavy fast charging Ni-Card battery. Comes complete with charger and rugged carrying case.
       
       
D10. LASER DISTANCE FINDER
 

Revolutionary Laser Distance Finder PRICE $359.00 + S&H

 

 
  This compact and handy Fluke laser distance meter is designed for indoor, and limited outdoor, applications Addition, subtraction, area, and volume, calculations could not be simpler. The extra bright laser is clearly visible so you can see your targeting point even if an object is hard-to-reach or distant. The Fluke 416D has a large LCD screen and buttons positioned for one-handed measurements.

The Fluke 416D laser distance meter brings you the most advanced measuring technology. These meters is fast, accurate, durable, and easy to use - just point and shoot. Its straightforward design and easy, one-button operation means you spend less time measuring. Unlike ultrasonic distance meters with laser pointers, the Fluke 416D uses a precision narrow laser beam that can avoid the common errors caused by extraneous objects near measurement targets. Measures up to 200 feet with accuracy of 1/16 of inch!
       
       
D11. ULTRASONIC LEAK DETECTOR
 

ULTRASONIC LEAK DETECTOR Price = $475.00 + S&H



   
  The Model 9061 Ultrasonic Leak Detector is designed to locate the source of ultrasonic sound emissions. These ultrasonic sound emissions are converted by the Ultrasonic Leak Detector to a range that can be heard by humans. The sound generated by the unit is 32 times lower in frequency than the sound that is received. It can find and rate compressed air and steam leaks at the corrugator, saving you the cost of the detector over and over again. The Ultrasonic Leak Detector comes with a carrying case, headphones, and the necessary equipment.
   
   
D12. STARRETT 100 POUND MAGNETIC BASE & FLEXABLE POST
 
PRICE $509.00 + S&H

 

 

   
  This is the ideal tool for measuring bearing wear and T.I.R. (roundness checks) on all important rolls on your corrugator. Many times rolls with bad bearings or rolls out of round cause many of the defects found on a corrugator. This tool is an excellent way to determine exactly how bad things are. The magnetic base allows you to hold firmly to all metal objects and the flexible post allows for you to reach the most awkward positions. This is the most heavy duty model available and comes complete with gauge.
       
       
D13. STARRETT 100’ LONG METAL TAPE PLUS STEEL CASING
 
PRICE $109.00 + S&H
 
   
  This durable 100 foot tape is perfect for alignment measurements at the corrugator since it is resistant to heat, dirt, and grease (can easily be wiped off of the tape while your winding the tape back in ).  Its hard satin chrome finish provides a no glare background and easy readability.  Tapes from a regular hardware outlet have the numbers painted on them, and they are not heat resistant.  The one that I bought was nothing but a smeared metal unmarked tape after its first contact with a preheater.  I have used my Starrett tape for over 4 years now and it is still in great condition.
       
       
D14. STARRETT 8” MECHANIC’S ADJUSTABLE LEVEL
 

PRICE $219.00 + S&H

 

   
 
This professional level comes complete with a ground and graduated main vial plus a cross test vial for improved accuracy. It also has a leveling screw for fine calibration. The ideal level for checking alignment and level problems on a corrugator.
 
       
       
D15. METAL FEELER STOCK IN 32 DIFFERENT SIZES FROM .001"TO .030"
 
PRICES $142.00 + S&H
 
   
  Each comes in its own identified wrapper and all fit in a solid fiber storage box. These are a must for checking glue roll/metering roll clearances. They are made 1/2” wide by 12” long from the finest tempered steel, and each one has a convenient hole on one end for hanging or grouping together. Be careful when you are checking glue roll clearances that you use only one feeler at time, since a number of these could go through the nip at one time, you could easily damage these expensive rolls.
       
       
D16. NCR PAPER IN 8" & 7/16" BY 200' ROLL SIZE
 
PRICE $52.50/ROLL + S&H
 
 
 

 

 
   
  This pressure sensitive paper is perfect for checking the parallelism of your corrugating rolls.  It can be used for the pressure roll nip, as well as to confirm that you have even loading.
       
       
D17. THE FLUKE 66 & 68  
 
Prices are:
Model 66 =$758.00
Model 68 = $849.00


   
  The Fluke 66 and 68 non-contact thermometers are the ideal professional diagnostic tools for HVAC technicians performing room balance checks, electricians evaluating electrical connections and auto mechanics diagnosing catalytic converters. This handheld portable tool enables professionals to research heating and ventilation problems, monitor and status of electrical motors and electrical panels and diagnose car malfunctions with ease. They measure surface temperatures, helping to quickly locate potential blockages of malfunctioning systems reducing work time and improving performance.
       
       
D18. INSTA-BLACK  
 
PRICE $39.00/BOTTLE + S&H
 
   
  There is a TAPPI recommended procedure for determining if you have enough chrome left on your corrugating rolls. Tappi Procedure shows you how to use solution for making the test correctly including how to interpret the results. Treat this solution with respect; wear latex gloves. Use only on cold corrugating rolls. One 8oz Bottle.
       
       
  D19. UF 60 ULTRASONIC  METERED DETECTOR KIT
 
PRICE  $1,995.00
( 33% Price Drop )

 

   
  A leak detector and an ultrasonic stethoscope will allow you to both hear and measure bad bearings, faulty traps, leaking valves, as well as even the tiniest pressure leaks such as steam, air, or other types of pressurized gases. Finding these defects before they become worse can save you hundreds of thousands of dollars a year in reduced maintenance and steam cost as well as greatly reduced labor. With experience you won’t have to guess if it needs to be replaced, you will know! Comes complete with metered pistol unit, interchangeable plug in modules for either leak detection or stethoscope, an ultrasonic tone generator, head phones, a rubber focusing extension, and a heavy duty carrying case with foam inserts.
       
       
D20. CHROME THICKNESS GAUGE
 

 

PRICE $485.00 + S&H

   
 

       
       
D21. DIGITAL DT-107 (LED) HANDHELD TACHOMETER
 
PRICE $509.00 + S&H

 

   
  This is the best in contact tachometers; this computer circuitry controlled unit offers an option of measuring in RPM, FPM, YPM, MPM as well as metric. It has an accuracy of 0.1%. This amazing unit updates the information every second, and will store the last four readings plus the minimum and maximum. It weighs only 1 pound and comes equipped with a carrying case, cone and  funnel shape adapters, and a six inch wheel and a 3-1/2” shaft extension.
       
       
D22. DTC W-1 WARP METER
 

 

PRICE $65.00 + S&H

   
 
DTC is extremely pleased to announce a revolutionary new warp meter, a meter that is fast, easy- to-use, accurate, instantly calibrated, and also extremely affordable! With the W-1 Warp meter all you have to do is position the gauge so that all 3 feet are making contact with the warped board and then read the warp directly in inches per foot! It reads in 1/8” increments. It is made of heavy ¼” thick Plexiglas so it is extremely sturdy, yet it is very light, and can fit in someone’s back pocket. For calibration all you have to do is place the meter on a good flat surface and then adjust the calibration screw on the bottom left of the picture until the triangular point above reads zero! We have only a limited supply of the W-1’s at present so don’t hesitate if  you want to try these for your plant!

       
       
D23. GLUE LINE WIDTH  
 
PRICE = $10.95 + S&H    
REFILL PRICE = $3.95 
Concentrated Iodine - you just pour into bottle and add water.

   
  This method of determining the width and integrity of your glue lines is used by many box plants   We are going to make it easier for you....we will send you a 22 oz. bottle of iodine that is premixed. All you have to do is point and spray. You will then be able to easily measure the width of your glue lines. You will also be able to determine if you have any adhesive application problems
       
 
web form
   
Top Of Page
Copyright 2006. All Rights Reserved  
. ::