Dream Tech Consulting
  Menu
  Search
 

Google

 


 
Mailing List
 
Enter your e-mail address to subscribe to our mailing list.
 
 

  ::Productivity:: :Equipment:

 

       
       
P1. THE EQUA-LINER  
 

PRICE $5,499.00 for most sizes + S&H

   
 
The Equa-Liner 1000 is the latest in automatic web tensioning; it is a single 6” diameter roll which has rubber silicone packing inside of it allowing it to bend along its internal 2” solid steel shaft and compensate for a loose or tight edge condition. The real beauty of this roll is that it can react to tension from any direction. Which makes it a natural to replace your wrap roll, right at the preheater. This is where most of the damage from loose and tight tensioning occurs!  In just 10 minutes your regular roll on the wrap arm can be replaced with the Equa-Liner, and your web tension problems are history! The Equa-Liner requires no air pressure, no electric current, and no metal to metal moving parts, that will bind. Our rolls are now in over 160 US plants including 17 Smurfit Stone Locations. Almost without fail, our Customers will come back and purchase more after trying their first Equa-Liner Roll. Bet you won’t be able to buy just one!
We carry all internal parts for the Equa-Liner 1000, including a complete factory rebuild where all internal parts are replaced for $2,995.00 + Shipping! Contact us for parts list and pricing!
   
   
P2. THE EQUA_LINER PARTS PRICE LIST
 
   
  The Equa-Liner works 24 hours a day; 7 days a week adjusting for tight and loose webs, out of alignments and even bad bearings! All of this action makes for even preheating, less wrinkles, improved bonding and reduced warp, and it does it automatically! Sooner or later the packing and perhaps even bearings wear out, and if these are not replaced other parts can give out because of undamped actions! Over the years we have noticed that some plants take real good care of their Equa-Liners, regualarly replacing packing's and even bearing's when they need it! While others we never hear from for years, but when we do usually a complete rebuilt is necessary where every internal part has to be replaced! An Equa-Liner is much like a car, take care of it and it will take care of you and last for a long time! However if you don't take care of it, you can expect a real emergency down the road, usually when you least expect it or can afford it!
   
   
P3. PACKING FOR EQUA-LINER 1000!!!
 
PRICE $99.00 each (New Style)

 

 

   
 
 
   
P4. STEAMINATOR
 

Steaminator with Bi-Pass Valve $3,880.00
Steaminator with Bi-Pass Valve & Timer $4,450.00

 

Steaminator with Bi-Pass Valve and Speed Regulator $4.395.00

 

   
 
When used as A Steam Shower Conditioning System, the Steaminator is designed to reduce corrugator belt slippage and/or provide a well-conditioned substrate, ready for processing. By conditioning from the inside of the belt, the Steaminator allows for faster penetration of the corrugator belt, or any other substrate, with less steam usage. The unique, versatile system provides an evenly controlled veil of steam turned on and off as needed, conditioning the substrates. The water slugging problem that is so prevalent with other steam showers is eliminated by the special by-pass valve which keeps the shower hot even when not in use, thereby eliminating water slugging! The Steaminator's moist, low pressure curtain of steam provides protection from fractured mediums, makes fibers more pliable, reducing tearing. It also improves pin adhesion strength and virtually eliminates loose liner problems.
 
 
  The Steaminator is a very versatile system and can be also as a Jet Assist with the addition of a Speed regulator. This allows for a uniform amount of High Velocity steam during changes in speed on the corrugator. You simply hook up to the High Velocity Steam on your corrugator and the by-pass valve allows a little steam to go through even when the corrugator is not running, to reduce condensation.
       
       
P6. REVOLUTIONARY NEW BATTERY POWERED ROLL PUSHER
 
PRICE $5,398.00 + S&H



 

       
  The B45C (Battery/45-ton/Center-Handle) is designed to roll cylindrical loads forwards. It features an electric motor, rechargeable battery pack, a centered, and height-adjustable handle shaft with an adjustable handle grip. Battery pack makes it simple and fast to change power packs when you run low on energy! Therefore you never run out of power! Since one is being used as the other recharges
       
       
7. THE DELUXE ROLL TRIMMER
 
PRICE $5.90 + S&H
 
       
  This special roll trim blade will safety remove your damaged plies from all roll stock without harming the good plies!  Time and time again you will reduce your waste dramatically by only removing the plies you want to remove!  You will also eliminate very costly web breaks from shafting rolls with partial blade cute just waiting to snap!  Trimmer is made from the hardest of Plastics!
   
   
P8. DRUM VAC
 

 

 

PRICE = $669.00 + S&H

 

 

Compressed air operated Reversible Drum Vac System attaches quickly to any closed head 55 gallon (45 imperial gallons) drum. Its high powered vacuum fills the drum in less than two minutes. With the simple turn of a knob, the same stainless steel pump quickly empties the drum. Coolant pumps can be easily refilled; floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.

Electrically operated "all purpose" vacuums aren't designed for use in industrial environments. As a result, motor wear out quickly and impellers clog. The Reversible Drum Vac does not use electricity and has no moving parts, assuring maintenance free operation. An automatic safety shutoff valve prevents spills and overflowing

       
       
P9. E-Z SPIN MAT
 
PRICE $65.00 + S&H

 

 

 

       
 

This mat takes all of the back breaking work out of turning a roll around, when a clamp truck is not available. Simply lay the mat next to the roll you want to turn, roll the roll onto the mat, and then you will be able to easily turn the roll in any direction you desire. When not in use, the mat can easily be kept in a tightly wound condition.

   
   
P10. DOVEY SOLID WAX BAR
 
DB Wax $325.00/per BOX, SF Wax $315.00/per BOX
 
 
       
 

The use of the Dovey wax bar at the corrugator, reduces the drag significantly when a bleached or mottled white DB liner is used, or on any board that creates excessive drag! The results of using the Dovey wax bar can easily be seen by a significant amperage decrease. In fact this system uses an amperage meter to automatically control when wax need to be applied!

   
   
P11. WAX BAR KIT
 
COMPLETE SF KIT PRICE $3,328.00
COMPLETE DB KIT PRICE $3,299.00
 
 

 

 

       
 

This is the kit that holds the wax bars and raises them into position againt the moving web.

   
   
P12. BELT TRACKER 11
 
PRICE $7,200 + S&H

       
 

This  100%  all mechanical Belt Tracker is completely revolutionary! Once it is mounted on your Top Corrugated Belt it will eliminate belt weave, loose or tight edges, and the need for a very wasteful extra trim allowance! And once again, with no electrical , pneumatic or metal-to-metal moving parts to bind, you will run trouble free. What we have here is an Equa-Liner Roll enlarged to 8” in diameter and then placed on plastic metal slide arrangement that takes up any extra belt slack that the roll can’t handle. Talk about double insurance!

   
   
P13. CABINET COOLER
 

 

PRICE $1,231.00 + S&H

 

       
 

A low cost, easy to install, maintenance free way to cool and purge electronic control panels. Cabinet Coolers incorporate a vortex tube that produces cold air from ordinary compressed air - with no moving pats. The compact Cabinet Cooler can be installed in minutes through a
drilled hole or standard electrical knockout. The cost is a fraction of Freon-type air conditioners or heat exchangers.

The vortex tube incorporated in the Cabinet Cooler System is constructed of stainless steel. The wear, corrosion and oxidation resistance of stainless steel assures long life and maintenance free operation of Cabinet Cooler Systems. Cabinet Coolers are UL and ULC Listed.

Cabinet Coolers are available with or without thermostat control.

   
   
P14. HONING STONES FOR A, B, C,& E FLUTE CORRUGATING ROLLS
 
PRICE $89.00 + S&H
 
 
   
 

This is just what you need for removing those small scratches and marks from your corrugating rolls to improve flute formation and particularly flute release. Order any or all of the four flutes above

       
       
P15. SWEED 450 DX
 
PRICE $4,750.00 + S&H Stand sold separately for $750.00
       
 
The SWEED 450 automatic band cutter quickly and easily disposes of the metal bands that you take off of every roll of liner or medium. Just feed a handful of metal bands into the wide mouth of the 450 and it delivers uniform 3” metal clips into a storage barrel! The SWEED 450 allows you to turn your worthless and unwieldy bands into a top priced raw material. The metal clips on each band are easily handled as well! With hardly any effort you correct a bad safety and appearance situation and turn it into a nice profit.
 
   
   
16. ROTARY DUST REMOVING SYSTEM
 
Brush Prices Starting At $1,144.25.00 For 87” Brush (Other Widths Quoted Upon Request)

       
 

The K&R Rotary Dust Removing System is designed to be installed on the double backer section.  It will keep the starch from building up on the top corrugator belt surface and aid in extending belt life and production of better quality corrugated board.  The system is made of rows of nylon bristle brushes then mounted on a shaft in herring bone or spiral configuration to form the K&R Rotary Dust Removing System.  The system is available in sizes to accommodate various belt widths.  The K&R Rotary Dust Removing System is controlled by a push-button control panal conveniently mounted for ready access.  The System comes fully wired for easy installation on acorrugator.  Electrical Characteristics:  230v/460v  3 phase.  Air Requirement: 80 Psi.

   
   
P17. SAFETY AIR GUN
 

This product will sell for $289.00 which includes the 4 Super Air Nozzle Cluster, an 18" long aluminum extension pipe can be added for $49.00.

 

       
 

The new Heavy Duty Safety Gun is a powerful air gun that delivers high force for use in rugged, industrial environment. The 3/8 NPT compressed air inlet increases the compressed air flow available to the Super Air Nozzle, resulting in higher force and flow than other guns. The durable cast aluminum body includes an ergonomic composite rubber grip and wide curved trigger that makes it comfortable for hours to use without fatigue, Aluminum Extension Pipes that provide additional reach for inaccessible area are available. This Air Gun is perfect for cleaning the corrugator!

   
   
P18. CORRUGATOR CHILLER SYSTEM
 
PRICE $15.969.00 + S&H
       
 
Increases corrugator productivity by maintaining constant flow of chilled water through the cooling jacket, while preventing gel build-up in the gluing applicators.  Self-contained in a single unit.  Compact design requires less space (48"W x 34"D x 69"H).  Low power consumption.  Automatic water level control.  Meets EPA and other federal, state, and local regulatory requirements.  Eliminates wastewater discharge costs.  Automatic water make-up for evaporation loss.  Relay for automatic corrugator interface.  Adjustable water flows bypass reduces water pressure.  Heavy duty design with highest reliability.  Simple to install and maintain.  Operates in all types of environments.
 
   
   
P19. 87” PRESSURE TYPE SINGLE FACER
 
Prices For 87” Pressure Type Single Facer
Starting At $335,000.00

 
       
 

K & H is a leading supplier of all types of corrugating equipment to Asia, Thailand, Malaysia, China, Singapore, Korea, the Philippines, and Latin America.  They have now established a sales service center in Florida and will be bringing its top quality products to the United States.  Listed below are a few examples of  the products and prices that they offer.  To make things simpler, all units are quoted for 87” widths.  Other widths are available and will be quoted upon request.  We can also send you any more examples if  interested, since they also make Automatic Flexo’s along with a complete corrugator line.

   
   
P20. 87” PRE HEATER
 
Prices For 87” Pre Heater Starting At $31,900.00

       
 

K & H is a leading supplier of all types of corrugating equipment to Asia, Thailand, Malaysia, China, Singapore, Korea, the Philippines, and Latin America.  They have now established a sales service center in Florida and will be bringing its top quality products to the United States.  Listed below are a few examples of  the products and prices that they offer.  To make things simpler, all units are quoted for 87” widths.  Other widths are available and will be quoted upon request.  We can also send you any more examples if  interested, since they also make Automatic Flexo’s along with a complete corrugator line.

   
   
P21. 87” ROLL STAND
 
Prices For 87” Roll Stand Starting At $35,200.00

       
 

K & H is a leading supplier of all types of corrugating equipment to Asia, Thailand, Malaysia, China, Singapore, Korea, the Philippines, and Latin America.  They have now established a sales service center in Florida and will be bringing its top quality products to the United States.  Listed below are a few examples of  the products and prices that they offer.  To make things simpler, all units are quoted for 87” widths.  Other widths are available and will be quoted upon request.  We can also send you any more examples if  interested, since they also make Automatic Flexo’s along with a complete corrugator line.

   
   
P22. 87” GLUE MACHINE
 
Prices For 87” Glue Machine Starting At $107,000.00

   
 

K & H is a leading supplier of all types of corrugating equipment to Asia, Thailand, Malaysia, China, Singapore, Korea, the Philippines, and Latin America.  They have now established a sales service center in Florida and will be bringing its top quality products to the United States.  Listed below are a few examples of  the products and prices that they offer.  To make things simpler, all units are quoted for 87” widths.  Other widths are available and will be quoted upon request.  We can also send you any more examples if  interested, since they also make Automatic Flexo’s along with a complete corrugator line.

   
   
P23. PNEUMATIC CORE RESTORER
 

PRICE $2,795.00 + S&H

       
 
Save Time And  Money   Immediate payback through damaged roll utilization.  70% greater force at any insertion length than other portable units - up to 16,000 lbs. (7.272 kg.) effective working thrust...@85 psi.  Effective with metal-capped and fiber cores.  Exerts continous during operation; no manual pumping required.  Smallest available entrance diameter - accommodates severely crashed cores.  Air operated - no hydraulic fluid leaks to damage web.  Easy to use - only one operator required.  Rugged, maintenance - free design.  Correct out-of-roundness for true - running rolls.
 
   
   
P24. THE SUPERSCORER
 
PRICE VARIES... Prices starting at $7,150.00

   
 

Economically priced with proven performance in the field, the SUPERSCORE conversion consists of a new annular high profile male ring and a lower anvil modified to CGS specifications when re-covered.This new scoring profile virtually eliminates rolled scores and significantly reduces score cracking.  If you are experiencing cracking with recycled liners, switching to a 60/70 Durometer  urethane on the female anvil in addition to the new SUPERSCORE male ring will greatly improve your results! The time has come to end rolled scores and fishtailing.  Stop feeding your baler and keep your boxes in line with  the new SUPERSCORE!

   
   
  CORRUGATOR SLITTER KNIFE GRINDING STONES
P25. DW-2 Replaces BHS 105406920
 
PRICE VARIES Prices starting at $7,150.00

 

Economically priced with proven performance in the field, the SUPERSCORE conversion consists of a new annular high profile male ring and a lower anvil modified to CGS specifications when re-covered.This new scoring profile virtually eliminates rolled scores and significantly reduces score cracking.  If you are experiencing cracking with recycled liners, switching to a 60/70 Durometer  urethane on the female anvil in addition to the new SUPERSCORE male ring will greatly improve your results! The time has come to end rolled scores and fishtailing.  Stop feeding your baler and keep your boxes in line with  the new SUPERSCORE!

   
   
P26. THE ORIGINAL HOTFOOT $9,590.00
 
PRICE Starting at $9,590.00 PER ROW OF HOTFOOT

 

 

 
 

This unit will give your double back section, greater heat, and faster production along with individual pressure control in every area. This is great for excessive belt edge wear and cooler temperatures in the center of the hot plates, which can be quite common.

       
       
P27. ANIT_BACKLASH GEAR  
 
PRICE Starting at $1,400.00

 

 

 

   
 

Innovation is once again leading the way with the all new Anti-Backlash drive gear.  This special design replaces the existing wrap arm drive gear on your pre-heater, and allows you to adjust the parallel and eliminate the back-lash at the same time!

   
 

Top Of Page
    Copyright 2006. All Rights Reserved